Table of Contents
Advertisement
Digital Zoom
Magnifies or reduces the projected image size.
1. After the adjustment bar displays, press
2. Press OK to enter panning mode.
3. Press the directional arrows ( ,
The picture can only be navigated after it is magnified. You can further magnify the picture while
searching for details.
Image
Digital Shrink & Shift
Resizing
Shrinks and/or shifts the projected image.
1. After the adjustment bar displays, press
2. Press OK to activate digital shift function.
3. After digital shift function is activated, press the directional arrows ( ,
4. Press AUTO to restore the picture to its original size.
The picture can only be shifted after it shrank.
Returns all of the adjustments you've made for the Display menu to the factory
Reset Display
preset values.
Network
Wired LAN
See
AMX Device
When AMX Device Discovery is On, the projector can be detected by AMX
controller.
Discovery
MAC Address
Displays the Mac Address for this projector.
(Wired)
Settings
Projector
See
Installation
Remote
Allows you to enable all the remote receivers or one specific remote receiver on
the projector.
Receiver
Auto Source
Allows the projector to automatically search for a signal.
Search
• On: Allows the projector to automatically determines the best picture timings for
Auto Sync
• Off: The projector will not respond when AUTO is pressed.
the image to a desired size.
to navigate the picture.
the picture to a desired size.
) to shift the image.
Controlling the projector via LAN on page
Choosing a location on page
the displayed image when PC signal (analog RGB) is selected and AUTO is
pressed.
/
repeatedly to reduce or magnify
,
,
) on the projector or remote control
repeatedly to shrink or magnify
/
53.
13.
Operation (under non-Launcher source)
,
,
49
Advertisement
Table of Contents
