Advertisement
Quick Links
2 Drawer Entertainment Centre
Assembly Instructions
033 xx 3560
- Please keep for future reference
Dimensions
Width - 97.8cm
Depth - 38.8cm
Height - 40cm
Important -
Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 01709 534123
Please turn to back page for important information when contacting Customer Helpline.
Rev C - 30/11/2015
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Argos 033 3560 Series
Summary of Contents for Argos 033 3560 Series
- Page 1 2 Drawer Entertainment Centre Assembly Instructions 033 xx 3560 - Please keep for future reference Dimensions Width - 97.8cm Depth - 38.8cm Height - 40cm Important - Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, call the Customer Helpline: 01709 534123 Please turn to back page for important information when contacting Customer Helpline.
- Page 2 Safety and Care Advice Important - Please read these instructions fully before starting assembly Do not stand or put weight on Check you have all the We do not the product, this could cause components and tools listed on recommend the damage.
- Page 3 Components - Panels Please check you have all the panels listed below Important - Thick lines indicate finished edges Front Front Grooved Grooved edge edge Trim x 2 Division (28.8x32cm) (38.4cm long) Right side Left side (38.4x35.8cm) (38.4x35.8cm) Code - 9155 Code - 684xx6520 9153 Code -...
-
Page 4: Components - Exploded View
Components - Exploded View Important - Thick lines indicate finished edges 684xx6520 Trim 7388 9153 7384 9155 7384 7389 622xx7002 624xx7005 9154 7383 623xx7002 622xx7002 4472 624xx7005 6845 6841 4472 684xx6520 6846 Trim 623xx7002... - Page 5 If you have damaged or missing components, call the Components-Fittings Customer Helpline: 01709 534123 Please turn to back page for important information when contacting Customer Helpline. Please check you have all the fittings listed below Note: The quantities below are the correct amount to complete the assembly, In some case more fittings may be supplied than are required.
- Page 6 Assembly Instructions Step 1 Fittings you will need for this step: Fitting dowels to top panel (x6) 7388 Note: Insert metal dowels as far as shown by arrows. Do not over tighten. Step 2 Fittings you will need for this step: Fitting cams to plinth Large and bottom panel...
- Page 7 Assembly Instructions Step 4 Fittings you will need for this step: Attaching runners (x2) (x1) : Align the drawer runner with the grooved edge of panel 9154 , the 2nd hole from the front will then line up with a pre-drilled hole, secure the runner to the panel using screw Note:...
- Page 8 Assembly Instructions Step 5 Fittings you will need for this step: Attaching runners (x2) (x1) : Align the drawer runner with the grooved edge of panel 9153 , the 2nd hole from Note: the front will then line up Ensure these with a pre-drilled hole, holes are secure the runner to the...
- Page 9 Assembly Instructions Fittings you will need for this step: Step 6 Fitting cams and Large wooden dowels to division (x2) (x2) Use a hammer to knock in wooden dowels into inner holes. Note: Ensure cam arrow points towards 9155 the edge with hole. Fittings you will need for this step: Step 7 Attaching runners...
- Page 10 Assembly Instructions Fittings you will need for this step: Step 7 - Continued : Turn panel 9155 (x2) (x1) over to attach runner. 9155 : Align the drawer runner with the finished edge of panel Note: Front finished edge 9155 , the 2nd hole from Ensure these the front will then line up...
- Page 11 Assembly Instructions Step 8 Fittings you will need for this step: Drawer assembly (x4) Insert dowels into 6845 drawer fronts 6845 6846 6846 Note: Insert metal dowels as far as shown by arrows. Do not over tighten. Fittings you will need for this step: Small Right hand side (x4)
- Page 12 Assembly Instructions Step 8 - Continued Drawer assembly Continued... Slide drawer bottom 4472 into grooves in left,right drawer sides 4472 4472 and drawer back. FOIL FACE Ensure foil on the FOIL FACE drawer bottom is facing upwards. : Insert cams already inserted in left and right drawer sides onto...
- Page 13 Assembly Instructions Step 9 Attach right hand panel to bottom panel Front grooved edge Insert dowels in right 9154 hand end panel 9154 into cams in bottom 7383 Then lock. 7383 Turn cam 180 degrees to lock Fittings you will need for this step: Step 10 Attach division to bottom panel...
- Page 14 Assembly Instructions Step 11 Attach plinth to right hand end panel then attach left hand panel to bottom panel Front grooved edge and plinth 9154 Important: 2 people required. With help insert cams in plinth 6841 onto dowels in right hand 9154 .
- Page 15 Assembly Instructions Step 13 Fittings you will need for this step: Turn unit over so grooved edges on (x8) on end panels are to the floor. Locate metal shelf pins to left and right hand ends and division 9153 Push metal shelf pins into panels 9153 9154 9155...
- Page 16 Assembly Instructions Step 15 Square unit up Measure to external corners Important: DIAG 1 Ensure a tape measure is used to square up unit! Before securing the back it is necessary to square up the unit. DIAG 2 You can do this by measuring between XX - XX and YY - YY ensuring these are the...
- Page 17 Assembly Instructions Step 17 Fittings you will need for this step: Attach trims 9153 Trims Turn unit over. (x2) Warning: 2 people to lift. Lift with care. Locate the notch on trim into 9153 groove on left 9154 right ends. 9154 Ensure the trims are positioned...
- Page 18 Assembly Instructions Step 18 - continued Locate drawers helpful hints Pull sliding part of drawer runners so they are fully extended. Locate drawer onto runners. Locate screwdriver into second threaded hole in drawer runner Keeping screwdriver in place push the drawer closed.The screwdriver will push against the end panel and extend the...
- Page 19 Congratulations! your unit is complete. Note: Please turn over for important information.
- Page 20 Important Information If you need help or have damaged or missing parts, call the Customer Helpline: 0170953412 Simply contact us on CUSTOMER HELPLINE : 01709534123 Between 8am - 4.30pm Monday to Thursday and 8am - 2.30p.m friday. Your statutory rights are not affected. Please have the following information: Unit Description, Product Code, Product Colour, Place of Purchase, Catalogue Ref.
Need help?
Do you have a question about the 033 3560 Series and is the answer not in the manual?
Questions and answers