Safety Notice Supplement - Keysight Technologies E5055A SSA-X Installation Manual

Caution

Safety Notice Supplement

Safety Notice Supplement
•
•
•
•
•
•
Keysight E5055A SSA-X Signal Source Analyzer
This equipment complies with EN/IEC61010-1:2010.
This equipment is of MEASUREMENT CATEGORY I (CAT I). Do not use for
CAT II, III, or IV.
Do not connect the measuring terminals to mains.
This equipment is a POLLUTION DEGREE 2, INDOOR USE product.
This equipment is tested in stand-alone condition and in combination with
the accessories supplied by Keysight Technologies against the requirement
of the standards described in the Declaration of Conformity. If it is used as a
system component, compliance of related regulations and safety
requirements are to be confirmed by the builder of the system.
Do not connect the measuring terminals to mains.
5