Time Slot; Encrypt Type; Rx Group List; Work Alone - Alinco DJ-MD 5E GPS Operation Manual

14. Time Slot

Set up time Slot 1 or time Slot 2 for the current channel. The separated time slots often
to be used with a repeater for 2 real time slots of 2 radios but must set them have the
same color code.
15. Digi Encrypt
In Analog channel: it will show the radio self ID which is programmed in PC software
 Analog Analog Address Book Number.
With the digital encryption, the communication will be secured and safe. Only the
radios have set same encryption code can communicate to each other. A total of 32
digital encryptions is offered, and it can be programmed in the PC software or defined
in the Menu setting.

16. Encrypt Type

There are 2 types of encryption. A normal encryption type and an enhanced
encryption type whith more secure.

17.RX Group List

It will allow edit the RX Group List and assign a new RX Group List to the channel.
Select: Select the current RX Group List.
Add Group: Add a talk group to the current RX Group List.
Remove : Remove a talk group from the current RX Group List.

18.Work Alone

In the PC software Public  Alarm settings  Work Alone, you have to set up the
response time, warning time and response method initially.
Turn on the work alone function for the current channel. When radio`s
predetermined time has been reached, the radio will beep a sound. At the time user has
to confirm by pushing the programmed work alone key to confirm continuing work
alone, otherwise, the radio will start alarm when reaching its preset response time.
19.CH Measure
Select On or Off.
This function is used to measure the distance to the target radio on current digital channel.
Before using this function turn GPS on, wait until radio catchs GPS signal sucessfully then
select CH measure on. Radio will automatically send and receive signal to the target radio
and then radio shows the distance on screen. When turn on the function it is availabe only
25