Battery Voltage Test; Main Band/Sub Band Switch; Vfo/Channel Switch; Set Up Vfo Frequency - Alinco DJ-MD 5E GPS Operation Manual

SIC OPERATIO

5.3 Battery Voltage Test

Press the programmed key to check the current battery voltage, then press the key
again to turn off.

5.4 Main band/Sub band switch

Press [PF1] key to switch the main channel and sub channel. Both channels are shown
on the screen but channel with bigger size is identified as main channel.

5.5 VFO/Channel switch

Press and hold [PF1] key to switch between VFO and memory channel mode display.
Be noted that VFO only can be switched when radio display mode is set as frequency.

5.6 Set up VFO frequency

Turn the radio to VFO mode, press the assigned key to switch and select main channel,
the VFO frequency can only be set up when the channel is the main channel.
There are 2 operations to select a desired frequency.
Operation 1: Input the VFO frequency directly by the keyboard.
Operation 2:Turn the channel knob to adjust the VFO frequency steps. The frequency
step size can be set in setting menu.

5.7 Select a Zone

A Zone is a group of channels grouped together. The radio has 250 zones, each zone
can have the maximum of 160 analog and/or digital channels.
Select the zone only valid in memory channel mode and be sure there are more than 2
zones in zone list.
Operation 1: Press
zone number or zone name.
Operation 2: Press
desired Zone.
Edit Zone Name: Press to select Edit Name, input zone name, then press confirm,
select save to save edited zone name.

5.8 Select a Channel

Press assigned key to switch radio to memory channel mode.
/ directly to switch zones, LCD will display the selected
( MENU) key then select zone, move the cursor to select the
9