PRESET OPERATIONS ( FUNCTION SETUP )
Channel Scan Skip
Users can choose whether to set current channel as Scan Skip by programming software.
Transceiver will skip current channel during scan when it is set as Scan Skip.
TX OFF
Once this function is enabled, [PTT] key becomes invalid and it works only as a receiver.
Battery Save Setup
This function prevents useless battery consumption by switching the power ON/OFF at a fixed ratio
if there is no key operation or receiving signal for a continuous period of 5 seconds or more. Higher
OFF time (1:4 setting) saves more amount of battery but may cause slight delay on receiving. The
Battery Save function is temporarily suspended when a key is operated or a signal is received.
Time-out Timer
This function stops the transmission automatically when the continuous transmission time exceeds
the set time and alerts it with a voice.
Time-Out Timer Pre-Alarm
This is the alarm that warns the user before TOT stops the transmission.
19
Professional
FM Transceiver