12. TX Prohibit
TX ON: Will allow to transmit on the current channel.
TX OFF: Will not allow to transmit on the current channel.
13. Radio ID
In Digital channel: it will show the radio ID which must be programmed in the PC
software Digital Radio ID list Radio ID.
It allows to edit and select an ID for the channel, each channel is allowed to select one
ID.
14. Color Code
The digital channel should have the same color code for communication as defined by
the repeater to be used. which can be programmed in the PC software or defined in the
Menu setting.
If 2 radios are using the same frequency but different color code it could not
communicate to each others.
15. Time Slot
Set up time Slot 1 or time Slot 2 for the current channel. The separated time slots often
to be used with a repeater for 2 real time slots of 2 radios but must set them have the
same color code.
16. Digi Encrypt
In Analog channel: it will show the radio self ID which is programmed in PC software
Analog Analog Address Book Number.
With the digital encryption, the communication will be secured and safe. Only the
radios have set same encryption code can communicate to each other. A total of 32
digital encryptions is offered, and it can be programmed in the PC software or defined
in the Menu setting.
17. Encrypt Type
There are 2 types of encryption. A normal encryption type and an enhanced
encryption type whith more secure.
18.RX Group List
It will allow edit the RX Group List and assign a new RX Group List to the channel.
Select: Select the current RX Group List.
Add Group: Add a talk group to the current RX Group List.
30