Table of Contents
Advertisement
Record file.
3. Select a Record to see the detail information.
4. Select Record Send, and it will display the Contact list or Manual Dial.
5. Select Contact list to choose a contact, press select to send the Record.
6.Select Manual Dial, input the DMR ID, press
ID, press select to send the Record
9. Contacts
Contacts List: Will display the digital contact list which had been programmed in the
PC software. This list is used as a look-up table to display the contact person
information when receiving a call.
New Contact: Allows to create a new digital contact.
Manual Dial: Input the group ID or private ID to access a contact quickly.
9.1 Messages
New Msg: Create a new message and send to a contact.
InBox: Shows all the received messages, and allows forward or delete the message.
OutBox: Shows all the sent messages, and allows resend, forward or delete of the
message.
Quick Text: Pre-saved messages, and allows to send, edit or delete the message.
Draft: Draft messages, and allows send, edit or deleting of the message.
9.2 Call Log
Sent: Shows all the dialed calls, and allow deleting the call record or saving the ID as
a new contact.
Answered: Shows all the answered calls, and allows deleting the call record or saving
the ID as a new contact.
Missed: Shows all the missed calls, and allows deleting the call record or saving the
ID as a new contact.
key to switch group ID or private
16
Advertisement
Table of Contents
