Table of Contents
Advertisement
Error
Code
Error Contents and Cause
(SD0)
The program scan time exceeded the
WDT value specified in the PLC RAS
5001
setting of the PLC parameter dialog
box.
The program scan time exceeded the
constant scan time specified in the PLC
5010
RAS setting of the PLC parameter
dialog box.
Corrective Action
Read the individual information of the
error with the GX Developer, check its
value (time), and shorten the scan time.
Review the constant scan time in the
PLC parameter so that the margin time
of constant scan may be fully reserved.
9.1.7 Error code list (5000 to 5999)
Corresponding
CPU
QS
QS
9.1 Error Code List
9
9-27
Advertisement
Table of Contents
