Fujitsu ETERNUS AF Configuration Manual page 14

Chapter 4 Checking the Server Information
2
Check the WWN of each Fibre Channel card.
# fcmsutil Device_File
Specify the Fibre Channel card device file names obtained from
The following shows the result when this command is executed for "/dev/fcd0".
The "N_Port Port World Wide Name" value is the Fibre Channel card WWN.
# fcmsutil /dev/fcd0
x Driver B.11.23.01 /ux/kern/kisu/FCD/src/common/wsio/fcd_init.c:Jan 15 2004,12:44:56
The WWNs identified here are needed for the "Add WWN" function of ETERNUS Web GUI.
Refer to "ETERNUS Web GUI User's Guide" for details.
FUJITSU Storage ETERNUS AF, ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel) for HP-UX
Vendor ID is = 0x001077
Device ID is = 0x002312
PCI Sub-system Vendor ID is = 0x00103c
PCI Sub-system ID is = 0x0012ba
PCI Mode = PCI-X 133 MHz
ISP Code version = 3.2.168
ISP Chip version = 3
Topology = PRIVATE_LOOP
Link Speed = 2Gb
Local N_Port_id is = 0x000001
Previous N_Port_id is = 0x000001
Local Loop_id is = 125
N_Port Node World Wide Name = 0x50060b00001d69c9
N_Port Port World Wide Name = 0x50060b00001d69c8
Switch Port World Wide Name = N/A
Switch Node World Wide Name = N/A
Driver state = ONLINE
Hardware Path is = 0/3/1/0
Maximum Frame Size = 2048
Driver-Firmware Dump Available = YES
Driver-Firmware Dump Timestamp = Mon Aug 23 19:09:27 2004
Driver Version = @(#) libfcd.a HP Fibre Channel ISP 23x
Copyright 2020 FUJITSU LIMITED
Step 1
14
in "Device_File".
P3AM-3772-22ENZ0