Installation Of Hcp 0006 A, Fully Assembled Panel; Extended Line Monitoring (Vds 2540, Vds 2543) - Bosch AVENAR panel System Manual

48 en | Installation
4.4

Installation of HCP 0006 A, fully assembled panel

The installation sequence is given by the numbers 1 to 10.
BCM-0000-B
Figure 4.2: Installation of HCP 0006 A, fully configured panel
4.5

Extended line monitoring (VdS 2540, VdS 2543)

Auxiliary power supplies to the following modules can be monitored for creeping short circuits
and creeping open: LSN 0300 A, LSN 1500 A, and BCM-0000-B (when using FPP-5000-TI13). A
creeping short circuit is detected by these modules. An FPP-5000-TI13 forwards the faults
detected and reported by the BCM-0000-B to the panel. Use additional 4-wire end of line
elements to monitor for creeping open.
Procedure:
2022-07 | 5.0 | F.01U.378.910
8
2
PRS-0002-C
PRD 0004 A
9
<= 4 Module
FPO-5000-PSB-CH
1
7
UPS 2416 A
4
3
System manual
HCP 0006 A
5
6
12 V / 28 Ah
12 V / 28 Ah
Bosch Sicherheitssysteme GmbH
AVENAR panel