Table of Contents
Advertisement
50
en | Installation
The FPP-5000-TI is connected directly to the LSN bus line and supplied with power via the bus
line.
You can find the installation instructions for the FPP‑5000‑TI module at
www.boschsecurity.com (document number for installation instructions: F.01U.081.396).
The technical data can be found in FPP‑5000‑TI Trouble Interface.
FPP-5000-TI13 Communication Interface
The Communication Interface is an extension for the External Power Supply Unit Kit only. It is
the communication interface between the External Power Supply Unit Kit and the panel, and
transmits the following faults to the panel:
–
–
–
–
–
–
Additionally, with the programming software, the switching outputs can be programmed and
the settings for extended line monitoring can be done.
2022-07 | 5.0 | F.01U.378.910
Mains fault
Battery fault
Battery internal resistance fault
BCM Battery Controller Module fault
Short 24 V outputs
Ground fault
System manual
AVENAR panel
Bosch Sicherheitssysteme GmbH
Advertisement
Table of Contents
