Bosch AVENAR panel System Manual page 18

18 en | AVENAR panel series
–
–
–
The housings for frame installation require the following mounting frames for surface-mounted
version:
Housing type
CPH 0006 A
MPH 0010 A
EPH 0012 A
PSF 0002 A
PMF 0004 A
USF 0000 A
Notes:
–
–
–
–
Mounting Plate
An HMP 0003 A Mounting plate can be mounted in large mounting frames FBH 0000 A and
FHS 0000 A; this mounting plate can be individually equipped. It contains fixing holes for a
distributor rail.
USF 0000 A is fitted with a mounting plate ex works, which can be equipped as required. It
contains fixing holes for two distributor rails.
Equipment Limits
The table below shows the maximum number of:
–
–
Housing type
CPH 0006 A
MPH 0010 A
EPH 0012 A
PSF 0002 A
PMF 0004 A
USF 0000 A
The table below shows the maximum number of:
–
–
–
2022-07 | 5.0 | F.01U.378.910
FBH 0000 A Mounting Frame Large
FMH 0000 A Mounting Frame Medium
FSH 0000 A Mounting Frame Small
All mounting frames have an opening for routing cables that is sealed with an insert. Pre-
punched cable entries can be created from this insert.
The FBH 0000 A and FHS 0000 A mounting frames are equipped with an earth bar ex
works.
For the FMH 0000 A, the FPO‑5000‑EB Earth Bar can be ordered as an extension if
required.
For continuous installation in combination, all mounting frames have T-shaped guide rails
on the base and T-shaped grooves on the top.
Modules
Panel rails (short PRS-0002-C, long PRD 0004 A)
Panel controllers
UPS power supply units
Batteries
Mounting frames
FBH 0000 A
FBH 0000 A
FBH 0000 A
FSH 0000 A
FMH 0000 A
FSH 0000 A
Modules
6
10
12
-
-
-
System manual
Short rails Long rails
1 1
1 2
- 3
- -
- -
- -
Bosch Sicherheitssysteme GmbH
AVENAR panel