20. Install and secure the top cover (
a. Place the cover on the cardboard wraps.
b. Place the long fiberboard edge protectors on the top.
c. Secure with strapping material.
The strapping must wrap around the top cover and outer wraps, then pass
through the area between the pallet base and floor, between the pallet skids.
d. Verify that the strapping is tight, straight, and properly positioned on the
fiberboard edge protectors on the container top.
FIGURE 5-22
21. Apply Tip-N-Tell devices and labels, address labels, shock watches, and Top-
Heavy labels where indicated.
5-20
Sun Enterprise 10000 System Hardware Installation and De-Installation Guide • July 2000
Securing the Top Cover
).
FIGURE 5-22