Middleware Settings; Auto Upload Results - Abbott DIGIVAL LFR-024 User Manual

7.4.2 Middleware Settings

Home>Settings>Connectivity>Middleware
Use the Middleware menu to configure the DIGIVAL to connect to a
middleware system designed for use with the DIGIVAL. Your network
administrator or middleware vendor should provide you with the necessary
configuration values.

7.4.3 Auto Upload Results

Home>Settings>Connectivity>Auto Upload Results
To edit the Host setting, tap the Host
line and the Edit Property screen
appears. Use the keypad to enter
either the name or the IP address
of the middleware server. If using
an IP address, the value should be in
the form 0.0.0.0, where each "0"
represents a number in the range
0-255. Tap OK to save the new value
and return to the Middleware Settings
menu.
To edit the Port setting, tap the Port
line and the Edit Property screen
appears. Use the keypad to enter the
port number to connect to on the
middleware server. The port number
should be a numeric value in the range
1-65535. Tap OK to save the new
value and return to the Middleware
Settings menu.
Use the Auto Upload Results menu
to select whether patient test results
should be uploaded to the middleware
system at the conclusion of each test.
If this option is disabled, patient test
results can be uploaded manually
to the middleware system from the
Preferences menu.
DIGIVAL User Manual 33