To add a lot to the blacklist, tap Actions then Add using touchscreen. Scan the
barcode or enter manually using the touchscreen keypad.
Tap OK to continue.
7.4 Connectivity
Home>Settings>Connectivity
7.4.1 Network Interface Settings
Home>Settings>Connectivity>Network
Tap OK to confirm and remove the
lot from the blacklist.
Tap OK to continue.
Use the Connectivity menu to
configure the DIGIVAL network
interface and the connection to
a middleware system. With the
appropriate middleware system, these
features allow patient test results to
be transmitted electronically to a
patient's electronic medical record,
eliminating the need to enter the
results by hand.
Use the Network menu to configure
the Ethernet interface on the
DIGIVAL. To view or edit the
interface settings, tap the interface
name ("eth0").
DIGIVAL User Manual
31