Lot Management - Abbott DIGIVAL LFR-024 User Manual

Settings - DIGIVAL Assay 1
Select Option
Always Read Now
Always Walk Away Mode
Back

7.3.6 Lot Management

Home>Settings>Test Settings>Lot Management
The Lot Management menu allows the administrator to specify how Lot QC
is handled. Lot QC refers to the requirement of performing successful QC on
any new lot of test devices prior to running patient tests with the lot.
When Lot QC is on, the DIGIVAL checks for prior successful QC when a
patient test is run. If successful QC has not been performed on the test device
lot, the DIGIVAL displays an error message indicating that QC tests must be
performed.
The DIGIVAL prevents the user from running a patient test with that lot until
the required QC tests have been run.
When Lot QC is off, the DIGIVAL allows patient tests to be run without
checking for prior QC on the test device lot.
28
1. Tap Walk Away Mode from the
Test Settings menu.
2. Tap the assay to configure.
3. Select the read type:
Always Read Now: All tests on
the DIGIVAL will read a test
OK
immediately after inserting a test
device.
Always Walk Away Mode: The
DIGIVAL will always time assay
development and interpret the test
result at the read time.
Select the desired Lot QC setting
using the touchscreen. Tap OK to
save the new setting and return to
Test Settings menu.
DIGIVAL User Manual