Auto Print; Qc Schedule - Abbott DIGIVAL LFR-024 User Manual

Home>Settings>Test Settings>Additional Fields > Read QC Test:

7.3.2 Auto Print

Home>Settings>Test Settings>Auto Print

7.3.3 QC Schedule

Home>Settings>Test Settings>QC Schedule
The QC Schedule assay menu allows the Admin to configure a QC schedule
for a single assay. QC schedules apply to the assay overall, rather than to
individual test device lots (as with Lot QC).
Entry of QC lot numbers may be
enabled or disabled. If enabled, the
DIGIVAL will prompt the user for
the QC lot number when running
a QC test. Tap OK to save the new
setting.
Use the Auto Print menu option to
configure the DIGIVAL to print the
test result immediately after running
a test.
The QC Schedule Menu allows the
Admin to configure QC schedules
for each assay. Each assay has its own
independent QC schedule settings.
Touch the row for any assay to
configure its QC schedule settings.
Select Warn or Lockout to enable a
QC schedule for this assay. When
Warn or Lockout is selected, the Rule
and Threshold options are displayed.
Touch the Rule or Threshold option to
configure the settings.
Select Off to disable the QC schedule
for this assay (default).
DIGIVAL User Manual 25