To Delete Operators, Or To Change Their Password - Abbott DIGIVAL LFR-024 User Manual

If you have set Operator ID & Password to require passwords in the
4.
Login menu, the DIGIVAL prompts the Operator for a password. See
7.2.2, "Operators." Only the Admin can change an Operator's password.
Passwords are case-sensitive and must have 4-20 characters.
Note: Use the ?123 or Abc keys to switch between the alphanumeric and
numeric keypads.
Enter the password. The message, "Confirm New Operator Password"
5.
displays.
Reenter the password and tap OK.
6.

7.2.2.2 To delete Operators, or to change their password

From Home>Settings>Access Control>Operators:
Settings - Operators
Operator List
Operator1
Operator2
Operator3
Change Password
Delete
Back Actions
Changing an Operator's password:
Passwords are case-sensitive and must have 4-20 characters. Use the ?123 or
Abc keys to switch between the alphanumeric and numeric keypads.
After selecting the operator in Home>Settings>Access Control>
1.
Operators, tap Actions.
Tap Change Password.
2.
Enter the new password and tap OK. The screen asks you to confirm the
3.
new password:
Enter the password again and tap OK.
4.
Tap OK to finish.
5.
20
Select the Operator by tapping
1.
the checkbox next to the
operator's name.
•
•
Tap Actions.
2.
DIGIVAL User Manual
Use the arrows at the
bottom of the screen or
swipe to move up or down
the list.
To de-select an operator,
tap the checkbox a second
time.