Abbott DIGIVAL LFR-024 User Manual page 16

Place the DIGIVAL on a clean, flat, level and stable surface within reach
1.
of an electrical outlet. Avoid placing the DIGIVAL in direct sunlight.
Allow sufficient space to open and close the drawer and to connect the
accessories to the connection ports which are located at the back of the
DIGIVAL.
At first time use, allow the DIGIVAL to adjust to room temperature for at
2.
least 30 minutes before using.
10
Connect the barcode scanner
3.
holster to the bracket provided
with the DIGIVAL, using the
thumbscrew.
Connect the bracket assembly to
4.
the back of the DIGIVAL.
Place the barcode scanner in the
5.
holster and connect to the USB
port at the back of the DIGIVAL.
Connect printer to the USB port
6.
at the back of the DIGIVAL.
(optional)
Connect the 12V power cord/
7.
adapter to the DIGIVAL. Plug
the appropriate, country-specific
adapter into an appropriate
electrical outlet.
DIGIVAL User Manual