Unpacking; Storage - Mitsubishi Electric AE-SW Series Instruction Manual

Unpacking

① Make sure that the packing case is free from any abnormality such
as being broken and/or wet.
② Check the indication on the package and the rated nameplate of the
breaker, and confirm that it matches your order.
Serial number is indicated on the rated nameplate and on the cradle
nameplate (Fig. 5-1  ).
Fixed type
*This is not
included.
Baseplate for fixing
Fig. 6-1

Storage

* If this product is used after being stored for more than 6 years, maitenance is required including lubrication etc. before
operation. Please contact our representative office.
Storage temperature
-20 °C to +60 °C
+60°C
Store within
this range.
-20°C
Average daily temperature
+35 °C or less
Fig. 6-5
No direct storage
Store the drawout type in the CONNECT position.
E-6
Drawout type
Installation
screw
Fig. 6-2
Avoid humidity
Relative humidity 85% or less,
without condensation
Fig. 6-6
Caution on dust
Completely seal the product
with the packaging case or a
plastic bag.
Fig. 6-8
Installation
bracket
Fig. 6-3
Avoid direct sunlight
Avoid direct sunlight during usage. Failure to do so could
result in temperature rise and malfunction. It could also
lead to discoloration of nameplates and molded cases.
Store in the OFF and DISCHARGED state.
Fig. 6-4
Fig. 6-7
Avoid corrosive gases
H S 0.01 ppm or less
2
SO 0.05 ppm or less
2
NH 0.25 ppm or less
3
Fig. 6-9
OFF
Fig. 6-10
Accessories
nameplate
CT rated
nameplate
Rated
nameplate