Transportation - Mitsubishi Electric AE-SW Series Instruction Manual

Transportation

Do not drop the product during
transportation and storage.
Fig. 7-1
Wire length 1 m or more
Lifting hook (HP)
Fixed type
Fig. 7-3
Take caution not to scratch
the control circuit termi-
nal block when lifting the
product with the lifting
hook (HP). Securely attach
the lifting hook (HP) so
that they will not come off
during transportation.
Fig. 7-6
When transporting a drawout type
breaker (AE4000-SW ~ AE6300-SW), be
sure to use 4 wires with a length of 1 m
or longer, or a lifter.
Do not roll the product.
Fig. 7-2
Wire length 1 m or more
Lifting hook hole
25
CONNECT position
Locking plate
Drawout type
Fig. 7-4
When transporting the product with its
cradle attached, check that the lock plate
is protruded in the CONNECT position. Do
not use anything else but the lifting holes.
Fig. 7-5
Since the conductors side is heavy,
be careful not to give an impact to
the product and the conductors when
landing the product.
E-7