Unpacking; Storage - Mitsubishi Electric AE-SW Series Instruction Manual

Unpacking

1
Make sure that the packing case is free from any abnormality such as
breaking and/or wetting.
2
Referring to the rating nameplate, make sure that the delivered breaker
is in conformity with your order. Serial No. is indicated on the rated
name plate and the cradle name plate (Fig. 4-1Q).
Fixed type
Not attached
Fig. 5-1

Storage

✽ When you start using the breaker after storage and if its storage period is over 6 years, use the ACB after grease lubrication.
Please contact to our service network how to grease.
°
+60 C
°
–20 C
Average temperature for 24 hours,
however, shall not be higher than 35°C.
Fig. 5-5
Fig. 5-8
Drawout type
Fig. 5-2 Fig. 5-3
Avoid humid air.
Relative humidity : 85% max.
Fig. 5-6
Fig. 5-9
Fig. 5-4
Fig. 5-7
S ≤ 0.01ppm
H
2
SO
2
NH
3
Fig. 5-10
OFF
Fig. 5-11
Accessories
nameplate
ETR accessories
Nameplate
CT rated
name plate
Rated
name plate
≤ 0.05ppm
≤ 0.25ppm
E − 5