Synthes MAXFRAME AUTOSTRUT User Manual page 7

2.6 Restrictions
MAXFRAME AUTOSTRUT Automated Hexapod Control
System is designed to be installed on the frame outside
the sterile field.
2.7 MRI Safety Information
Prior to MRI, the MAXFRAME AUTOSTRUT Control
System (including motors) must be removed.
Then the MAXFRAME AUTOSTRUT hexapod struts
must be removed and substituted with corresponding
MAXFRAME Quick Adjust or Standard struts.
The original MAXFRAME System is MR conditional;
please see its IFU for specific conditions.
2.8 Software Requirements
In order to install the MAXFRAME AUTOSTRUT Soft-
ware, the physician will need administrator privileges
on the computer.
• Operating system:
The MAXFRAME AUTOSTRUT Software can be used
with the following minimum operating systems:
Microsoft Windows 7, 8 and 10 (preferred). The most
recent information regarding supported operating
systems can be found at the OrthoSpin web page
www.orthospin.com
• Computer hardware:
To use the MAXFRAME AUTOSTRUT Software, your
computer must meet the following minimal hardware
requirements:
• CPU: 1.2 GHz or faster.
• RAM: 2 GB or more.
• Available hard disk space: 10 GB or more.
MAXFRAME AUTOSTRUT™ System • Physician User Manual
5