Takara Belmont MAJOLICA PORTO EX-SB 1 Series Installation Instructions Manual page 19

3. Detach the temporarily fixed parts, attach a
rubber bush (not included) on the drainage pipe
riser.
4. Put the P-trap pipe or S-trap pipe through
the cover(large), and insert it in the rubber bush
(not included).
5. Attach the trap to the P-trap pipe or S-trap pipe
and the drain housing.
5
Shower hose
Caution
the trap. If not, the trap might not be
connected properly, or the shower head
cannot be taken out from the shower head
holder.
Closeup
Trap
2, 5
S-trap type
Plastic packing
Rubber packing
S-trap pipe
Paper packing
Cover(large)
Pay attention to the position of
packing and the order you
attach the packings. If it is done
incorrectly, it may result in a
water leak.
3, 4
S-trap type
S-trap pipe
Cover(large)
Rubber bush
(not included)
floor floor
Drainage pipe rises
(VU40/VP40)
19
P-trap type
Cover(large)
P-trap pipe
Trap
Caution
P-trap type
Drainage pipe rises
(VU40/VP40)
P-trap pipe
Cover(large)
Rubber bush
(not included)
wall
wall