Table of Contents
Advertisement
<Double tap type>
■
2
Attach thermostat
1. Attach the elbow onto the thermostat.
٭Pay attention to the direction of the elbow.
2. Put the thermostat packing (black) on top of the
thermostat, and insert it into the thermostat
hole in the basin.
3. Put the thermostat packing (white) on top of the
thermostat and fix it onto the basin by the thermostat nut.
٭The thermostat packing (white, 1pc) and the
thermostat nut are included in the basin assembly kit.
Caution
•Pay attention to the direction of thermostat and the order you attach the packings.
If it is done incorrectly, it may result in water leak or affect the connectivity of other parts.
•Do not loosen or remove the grey nut from the thermostat.
Water regulator
Thermostat nut
Water regulator
Thermostat
Basin
Thermostat hole
Thermostat packing(white)
Attach the thermostat
parallel to this face
Thermostat packing(black)
Thermostat
Packing
Elbow
Attach the elbow in the same direction as
the flexible pipe connecting port
Thermostat
Drain
12
٭never loosen and
remove these nut
Thermostat
Thermostat packing(black)
Basin
Basin
Basin mounting
surface for the
wall
Elbow face drain hole
Advertisement
Table of Contents
