Table of Contents
Advertisement
■
<Double tap type>
2
Temperature control knob
1. Attach the handle lock to the thermostat.
٭Pay attention to the parts mounting directions.
Dent(short)
2. Attach the conversion adaptor to the thermostat.
٭Pay attention to the parts mounting directions.
٭Fit in the centre plane
of conversion adaptor
and the red line of
thermostat
3. Attach the temperature control knob to the conversion
adaptor, and fix it with the screw.
٭Pay attention to the parts mounting directions.
[4×16], Pan head self tapping screw...1
٭Fit in the dent of temperature control
knob to the conversion adaptor
4. Place the cap on the temperature control knob.
٭Make sure the cap is placed straight onto the top of
the temperature control knob.
Nail(long)
٭Fit in the nail of handle lock and
the long dent of thermostat
Dent(long)
Centre
plane
Correct
Incorrect
Correct
21
Incorrect
Tap cap
[4×16]
Pan head
self tapping screw
Temperature
control knob
Conversion adaptor
Handle lock
Thermostat
Advertisement
Table of Contents
