Table of Contents
Advertisement
3
Drain housing
■
1
Remove the drain housing nut, packing(white)
and triangular packing(black) from the drain housing
： 1٭Do not remove the U-packing (black).
： 2٭Remove the drain cap and strainer
from the drain housing when inserting it
into the basin. Otherwise they might
pop out and damage the basin and the floor.
■
2
Seal the drain housing
The sealant agent shonld use black color.
Caution
Apply a sufficient quantity of sealant agent around the
drain housing as shown below when installing the drain
housing in the basin.
Insufficient sealant agent may allow hair to be caught
between the drain housing and the basin.
If excess sealant agent is protruding from the basin
side, wipe it off completely with soft cloth.
Leaving excess sealant could allow staining by coloring
agents or dirt.
Sealant agent
(black)
Drain
housing
■
3
Insert the drain housing into the basin, and fix it with the triangular packing(black),
packing(white) and drain housing nut.
Drain housing
Caution
•Pay attention to the order you attach packings. If it is done incorrectly, it may result in a water leak.
•If the sealant overflows from the drain housing and basin, and adheres to the basin surface,
remove it completely. Otherwise it might encourage colour stains and other smudges.
Soft cloth
U-packing(black)
:1٭Don't remove U-packing(black)
:２٭Drain cap
:２٭Strainer
Correct
Drain housing
Packing(white)
Triangular packing (black)
٭Smaller diameter
face drain housing
13
Triangular packing
(black)
Packing(white)
Drain housing nut
Guide of sealant quantity
U-packing
(black)
Sealant agent
(black)
incorrect
Drain housing nut
Advertisement
Table of Contents
