Table of Contents
Advertisement
Floor surface
Floor surface
Ensure that the material or finishing of the floor surface is waterproof material or has a waterproof coating
applied.
Always ensure that the floor surface is horizontally level.
Ensure that the floor surface is smooth and free from bumps around the attachment areas.
Wall
For installation on the wall, the wall base strength should be equal to or stronger than a 42mm-thick
composite panel. If the wall is made of plaster or its thickness is less than 42mm, add a wooden
reinforcement onto the wall(See page 2).
Use a waterproof material such as melamine for the wall surface (for possible water splashes during
shampoo treatment).
Ensure that the wall surface is vertically straight (if not, it might affect the neck height of the basin or cause
poor drainage).
Raising pipes
Always use a rigid PVC pipe and rigid PVC pipe joint(VU40/VP40) when raising a drainpipe.
After the installation, ensure that the drainpipe is stable.
Always attach a rubber bush(not included) when raising a drain pipe for the wall (or the floor)
Always attach a stop valve mounting bracket(not included) when raising a water supply pipe and
a hot water supply pipe
Stop valve
mounting bracket
Waterproofing
If the equipment is installed on the first floor or higher floors, waterproof the floor appropriately
(e.g. do water proofing work, use a floor tray made of stainless steel, set up a water leak sensor, etc.)
Installation of pipes
The following points are important to adhere to during the installation of pipes. Read through
the details carefully and ensure that the pipes are installed correctly.
When installing this product, ensure that installation of pipes adheres to the instructions outlined in
"Precautions during installation of pipes". Installing pipes without reading through the precautions will
mean water may not mix properly, and a set temperature will not be achieved.
This product is designed for indoor installation only.
Rubber bush
4
Stop valve mounting bracket
Pipe(VU40 / VP40)
Joint(VU40 / VP40)
Pipe(VU40 / VP40)
Piping specification
Hot water /
water supply
Drainage
Rc 1/2"
VU40 / VP40
Advertisement
Table of Contents
