Table of Contents
Advertisement
<Single tap type / Double tap type>
■
1
Attach the water regulator
1. Remove the packing (white, 1pc) and nut from
the water regulator.
٭Do not remove the packing (black).
2. Attach the packing(black, 2pcs) on to the water
regulator, and insert it into the water regulator hole
in the basin.
3. Put the packing(white, 1pc) back to the water
regulator, and fix it onto the basin by tightening the nut.
٭The packing(black, 2pcs) are included in the basin
assembly set.
Caution
•Pay attention to the direction of water regulator and the order you attach the packing.
If it is done incorrectly, it may result in a water leak or affect the connectivity of other parts.
•Make sure to insert the water regulator into the correct hole in the basin(Double tap type).
Basin
Nut
Packing(white)
Water regulator
Basin mounting
surface for the wall
Water regulator hole
Attach the centre of the water
regulator vertically to the basin
mounting surface for the wall
Nut
Water regulator packing(black)
Water regulator
٭Shorter tube
face drain hole
11
Water regulator
Packing (black)
Packing (white)
Water regulator
Packing(black), 3
Basin for single tap
Basin
Basin mounting
Drain
surface for the wall
Advertisement
Table of Contents
