Moving The Motion Platform By Hand - PI L-412 9025E1 Series User Manual

8 MAINTENANCE
NOTICE
Damage due to unsuitable cleaning agents!
Some cleaning agents can cause rusting on the L-412.xx9025E1 or dissolve plastics, paints or
adhesives.
► Do not clean with water or acetone.
Cleaning the L-412.xx9025E1
1. Dampen the cloth with the cleaning agent or disinfectant.
2. Carefully wipe the surfaces of the L-412.xx9025E1.
8.4

Moving the Motion Platform by Hand

It may be necessary to move the motion platform manually,
■ to allow access to the mounting holes in the positioner's base body for the mounting
screws,
■ to move the motion platform away from the mechanical hard stop and make the
L-412.xx9025E1 operational again.
Requirements
You have disconnected the L-412.xx9025E1 from the electronics.
✓
Moving the Platform by Hand
1. Preparation
a) For L-412.xx9025E1B models: Release the holding brake:
➔ The holding brake is released.
2. Exert a steady force on the motion platform to move it.
26
L412UM0002EN ‒ 10/24/2022
Apply the supply voltage to the holding brake connectors (p. 38).
M O T I O N | P O S I T I O N I N G