PI L-412 9025E1 Series User Manual page 22

6 INSTALLATION
b) Rotary encoder connector: Use a sensor cable to connect the connector
L-412.xx9025E1 to the sensor connector on the electronics.
c) Drive connector: Use a motor cable to connect the L-412.xx9025E1's
to the drive connector on the electronics.
d) Linear encoder connector
3. Secure the connectors against unintentional removal.
4. If necessary: Turn the drive and encoder connector carefully to a position suitable for your
installation conditions.
The drive and encoder connector of the L-412.xx9025E1 can be turned up to 180° (in steps
of approximately 7°).
Figure 10: Rotation range of the L-412.xx9025E1's drive/sensor connectors
22
L412UM0002EN ‒ 10/24/2022
Sensor of the
Motor connector
≈7°
M O T I O N | P O S I T I O N I N G