Table of Contents
Advertisement
6 INSTALLATION
6
Installation
6.1
Mounting the L-412.xx9025E1
CAUTION
Risk of crushing by moving parts!
Risk of minor injuries from crushing between the moving parts of the L-412.xx9025E1 or the
load and a fixed part or obstacle.
► Use safeguards to protect limbs in areas where they could be caught by moving parts.
► Maintain the safety distances according to DIN EN ISO 13857 when installing protective
structures.
NOTICE
Damage due to collisions!
Collisions can damage the L-412.xx9025E1, the load to be moved, and the surroundings.
► Make sure that collisions are not possible between the L-412.xx9025E1, the load to be
moved, and the surroundings in the motion range of the L-412.xx9025E1.
► Do not place any cables or other objects in areas where they could be caught by moving
parts.
NOTICE
Damage due to mechanical stress on the cable!
The cable will break from excessive bending or crushing. A broken cable will lead to failure
of the L-412.xx9025E1 or damage to the L-412.xx9025E1 or the electronics.
► Install the L-412.xx9025E1 so that the cable cannot be bent or crushed too strongly.
6.1.1
Mounting the L-412.xx9025E1 from Above
Overview
Figure 7: Mounting the L-412.xx9025E1 onto an underlying surface
Tools and Accessories
Mounting kit for mounting the L-412.xx9025E1 (p. 14)
■
17
L412UM0002EN ‒ 10/24/2022
M O T I O N | P O S I T I O N I N G
Advertisement
Table of Contents
