Table of Contents
Advertisement
5.4.3. Software Update
To update software, follow the steps detailed in 5.4 above under
"Setting mode" to activate its cell and do the following:
After confi rming the passcode select software update.
Insert the USB key with the new software revision or select the Cancel
Symbol to abandon this process.
Once the boot loader USB key is inserted, the confi rmation indicator
light (J) will begin fl ashing indicating the need to confi rm the selection
manually before the start of the software update.
Once it is confi rmed by pressing the Control Knob (K), the boot
loader will update the software automatically. During this process the
confi rmation indicator light (J) will turn on until the new software is
uploaded into the device.
Note: If both the software revisions in the device and the USB Key
are the same, the device will cancel this process and restart the mixer
without writing software from the USB key into the device.
25
eAdvantage User Manual (15PL1033 Rev. 7, July 2022)
Advertisement
Table of Contents
