Lock Feature - O-Two eAdvantage 01EQ3000 User Manual

Electronic nitrous oxide/oxygen analgesic gas mixing and delivering system

Hide thumbs Also See for eAdvantage 01EQ3000:

Table of Contents

Press Control Knob (K) to conﬁ rm selection. Once conﬁ rmed, the 2

numbers stop ﬂ ashing and the screen will display the new gas mixture

selection.

5.3 Lock Feature

The eAdvantage® is equipped with a "lock" feature (protected by

passcode) to prevent patients from making changes to the setting

selected by their caregivers.

Note: When the lock is activated the mixer will not permit changes to

the selected concentration and will inactivate the Setting mode and

Oxygen Flush function

Rotating the Control Knob (K) in either direction will result in changing

the symbol from lock to unlock or vice versa.

Press Control Knob (K) to conﬁ rm selection.

Once conﬁ rmed, a 3-digit passcode will appear. The default passcode

number shipped with each unit is 000. Users may change the passcode

in the setting mode (see section 5.6).

To unlock the screen, repeat the same steps required to lock the screen.

eAdvantage User Manual (15PL1033 Rev. 7, July 2022)

To activate the lock

feature, rotate the Control

Knob until the selection

frame surrounds the lock

symbol as shown below:

Press the selection

knob (K) to activate the

selection. At this point

the symbol changes

from solid to ﬂ ashes

accompanied by a color

change from light grey to

yellow.

Table of Contents