Vehicle Cradle 24/72Vdc Input Cable Connection; Figure 13 Vehicle Power Supply, 24 - 72Vdc (Fuse Not Shown); Figure 14 Connecting The Power Supply To The Vehicle; Figure 15 Power Supply Mounting Template (Not To Scale) - LXE RX2 User Manual

Determine Power Source

Vehicle Cradle 24/72VDC Input Cable Connection

Caution
1. Make sure the RX2 power switch is in the Off position.
2. Turn the Power Supply toggle switch to the Off position.
E-EQ-RX2OGWW-B
For proper and safe installation, the input power cable must be connected to a
fused circuit on the vehicle. This fused circuit requires a 5 Amp maximum time
delay (slow blow) fuse. If the supply connection is made directly to the battery,
the fuse should be installed in the positive lead within 5 inches of the battery
positive (+) terminal.

Figure 13 Vehicle Power Supply, 24 - 72VDC (Fuse Not Shown)

WHITE
GREEN

Figure 14 Connecting the Power Supply to the Vehicle

4.7"

Figure 15 Power Supply Mounting Template (Not to Scale)

1. Power Switch
2. Power On Indicator
3. Output to RX2
4. Input from Vehicle Battery
9.25"
8.75"
15
TO VEHICLE
TERMINAL BLOCK
WHITE - Power Out
BLACK - Return
GREEN - Chassis Ground
3.5"
RX2 User's Guide