Checking The Charge Level; Charging External Devices - Silvercrest SPB 2.600 D1 Operating Instructions And Safety Instructions

Alternatively you can also use the USB mains
adapter of your mobile device to charge the
battery of the Power Bank, provided its output
meets the following values:
5V

7.2 Checking the charge level

You can also check the charge level of the Power Bank when
it is not being charged or discharged. To do this, briefly press
the Charge level/START button (1). The LEDs (2, 3, 4, 5) give
you information about the charge level of the Power Bank for
approximately 30 seconds.
LED display
All LEDs light up
Three LEDs light up
Two LEDs light up
One LED lights up
All LEDs off
Please note that the LED display gives only an approximate
value of the actual charge level of the Power Bank.

7.3 Charging external devices

 To charge an external device with the Power Bank, connect
the Power Bank with the external device using the supplied
USB charging cable (B). To do this, plug the Micro-USB
connector of the USB charging cable (B) into the Micro-
, at least 1 A.
SilverCrest SPB 2.600 D1
Charge level
75–100%
50–74%
25–49%
1–24%
0%
English - 33