Checking The Charge Level; Handling And Operation; Charging Mobile Devices With The Power Bank - Silvercrest SPB 10000 A1 Operating Instructions Manual

Option B
♦ Connect a Micro-USB cable (not supplied) to the Micro-USB input
the Power Bank.
♦ Connect the other end of the Micro-USB cable to a switched-on PC or a
USB power supply (not supplied).
The current charge level is shown during charging by means of the charge
level LEDs
CAUTION!
►

Checking the charge level

You can also check the charge level of the Power Bank when it is not charged
or while it is being used for charging.
♦ Press the ON/OFF button
level of the Power Bank for about 15 seconds.
LED display
All LEDs are on
Three LEDs are on
Two LEDs are on
One LED is on
One LED is flashing
All LEDs off

Handling and operation

Charging mobile devices with the Power Bank

You can charge up to three devices at a time using the Power Bank. When
all three outputs are being used, the total charging current may not exceed
2.1 A.
♦ Connect a suitable USB charging cable to the corresponding USB output
(
♦ Then connect the USB charging cable to the device to be charged. The
charging process starts automatically.
♦ If charging does not start automatically, press the ON/OFF button
briefly to start the charging process.
SPB 10000 A1
.
Do not use both charging options simultaneously as this could dam-
age the Power Bank, your mains adapter or your computer.
or ) of the Power Bank for each device being charged.
briefly. The LEDs show the current charge
on
Charge level
100%
75–99%
50–74%
20–49%
< 20%
0%
│
GB 7 ■