Storing The Device When Not In Use - Silvercrest SPB 2.600 D1 Operating Instructions And Safety Instructions

SilverCrest SPB 2.600 D1
USB socket of the external device, and plug the USB
connector into the USB socket (6) of the Power Bank. If
charging does not start automatically, briefly press the
Charge level/START button (1) to start the charging
process. Alternatively, you can also use the original
charging cable of the respective device manufacturer (USB
port).
During the charging process, the LEDs (2, 3, 4, 5) give you
information about the current charge level of the Power Bank.
 You can stop the charging process at any time by
unplugging the USB charging cable (B).

7.4 Storing the device when not in use

If the Power Bank is not going to be used for a
long period of time, you should recharge it on a
regular basis. This helps maintain battery
performance.
Keep the device in a cool, dry place.
34 - English