Checking The Charge Level; Charging External Devices - Silvercrest SPB 5.2 A1 User Manual And Service Information

Alternatively, you can also use an external USB mains adapter
(not included in the package) to charge the battery of the Power
Bank.

Checking the charge level

You can also check the charge level of the Power Bank (A) when it is not being
charged or discharged. To do this, briefly press the Charge level/START button
(3). The LED display (2) gives you information about the charge level of the
Power Bank (A) for approximately three seconds:
LED display
All LEDs on
Three LEDs on
Two LEDs on
One LED on
All LEDs off
Please note that the LED display gives only an approximate value of the actual
charge level of the Power Bank.

Charging external devices

To charge an external device with the Power Bank (A), connect the Power Bank
(A) with the external device using the supplied USB charging cable (B). To do
this, plug the Micro-USB connector (5) of the USB charging cable (B) into the
Micro-USB socket (4) of the external device, and plug the USB connector (6)
SilverCrest SPB 5.2 A1
Charge level
Approximately 100%
Approximately 75%
Approximately 50%
Approximately 25%
Approximately 0%
English - 13