Checking The Charge Level - Silvercrest SPBW 3000 A1 Operating Instructions Manual

♦ Connect the USB plug of the charger cable
a suitable a USB mains adapter (not supplied).
♦ Connect the microUSB plug of the charging cable
to the microUSB charging port
Power Bank. An estimate of the charge level is
shown by means of the charge level LEDs
LED display
One LED is flashing
One LED is on, the second LED
is flashing
Two LEDs are on, the third LED
is flashing
Three LEDs are on, the fourth LED
is flashing
All LEDs are on

Checking the charge level

You can also check the charge level of the Power
bank when it is not charged or is being used for
charging.
│
■ 36
GB │ IE
on the
Charge level
< 20%
20–49%
50–74%
75–97%
98–100%
SPBW 3000 A1
to
.