Checking The Charge Level; Handling And Operation; Charging Mobile Devices With The Power Bank - Silvercrest SPB 5200 A1 Operating Instructions And Safety Instructions

Option B
♦ Connect the Micro-USB cable
on the Power Bank.
♦ Connect the other end of the Micro-USB cable to a switched-
on PC or a USB power supply (not supplied).
The current charge level is shown during charging by means
of the charge level LEDs
CAUTION!
► Do not use both charging options simultaneously as this
could damage the Power Bank, your mains adapter or
your computer.

Checking the charge level

You can also check the charge level of the Power Bank when
it is not charged or while it is being used for charging.
♦ Press the ON/OFF button
current charge level of the Power Bank for about 20 seconds.
LED display
All LEDs are on
Three LEDs are on
Two LEDs are on
One LED is on
One LED is flashing
All LEDs off

Handling and operation

Charging mobile devices with the
Power Bank
You can charge up to three devices at a time using the Power
Bank. When all three outputs are being used, the total charg-
ing current may not exceed 2.1 A.
♦ Connect a suitable USB charging cable to the corresponding
USB output (
being charged.
♦ Then connect the USB charging cable to the device to be
charged. The charging process starts automatically.
SPB 5200 A1
.
briefly. The LEDs
or ) of the Power Bank for each device
to the Micro-USB input
show the
GB │ CY
Charge
level
100%
75–99%
50–74%
20–49%
< 20%
0%
│
7 ■