Table of Contents
Advertisement
100593 - 3200 PORTAbLE POwER STATiON
intelligauge
This meter displays a variety of info such as input/output power, charge/discharge times, as well as faults, errors, and protection codes to
help diagnose malfunctions in the Power Station.
The top displays input and output information.
The bottom displays output percent (%), battery level, and icons related to which outlets are in use, specific warnings or other faults and
functions.
1. Battery 1 – Displays Power Station info when illluminated.
2. Battery 2 – Automatically toggles and illuminates to display
external battery info when external batteries are paired and
connected. (Model 201107 - Expansion Battery Pack not
included, sold separately).
3. Fuel Gauge – Shows battery level in increments. Each bar
represents approximately 20%.
4. LED – LED light is on.
5. 12V – Always ON. The 12V DC outlet is powered on and ready
for use when steady blue. Steady red if a fault has occured in
12V outlet.*
6. USB – Always ON. The USB outlets are powered on and ready
for use when steady blue. Steady red if a fault has occurred
in any of the USB outlets.*
7. Low Temperature – Steady red if internal temperature
too low.
8. High Temperature – Steady red if internal temperature
too high.
9. Warning – Flashes red when battery or circuitry
communication fault has occurred. Steady red when BMS
fault has occurred.
10. THD – Steady red when THD is above 5% and THD Shield
is enabled. AC power output will be shut off. Flashes red if
THD is above 5% and THD Shield is disabled. AC output will
remain on.
1
1
18
2
2
17
3
4
12
1234
5
H/W
W/H/ / V A
H
16
W
15
14
%
6
7
8
9
11. 120V – The 120V AC outlets are powered on and ready for
use when steady blue. Steady red if overloaded or fault has
occurred in 120V AC inverter or outlets (see Resetting the
Output section).
12. THD Shield Disabled – Steady blue when THD Shield
disabled and THD below 5%. Flashes blue when THD Shield
disabled and THD above 5%. AC power output will remain on.
13. THD Shield Enabled – Steady blue when enabled. Safely
stops AC power output when THD Shield rises above 5% to
protect sensitive electronics. See THD Shield (Total Harmonic
Distortion) section.
14. Fuel Gauge – Shows battery level in %. When multiple
external batteries connected, the percentage of each battery
is added together and can read higher than 100% when
battery 2 icon is illuminated.
15. Output Watts (W), Hours until empty (H), AC Volts (V), and
AC Amps (A).
16. Input Watts (W) or Hours until full (H).
17. Battery Out – Indicates battery is discharging.
18. Battery In – Indicates battery is charging.
* See 12V DC and USB Fault Locators in Indicators table below for description of
numbers below icon.
15
CONTROLS AND fEATURES
13
/
12
11
10
Advertisement
Table of Contents
