Table Of Contents - Dantherm HCV 3 Manual

Overview
Introduction
Serial number
Warning
Important
Table of content
22
Introduction
This is the user's guide for the home ventilation unit HCV 3 and HCV 5 from Dantherm
Air Handling. The table of contents below lists the sections in this guide.
For any future inquiries regarding e.g. spare parts we kindly ask you to make a note of
the serial number of the unit here: ______________________
This instruction covers units with serial numbers equal to or higher than:
The power must not be connected until the ducting system has been mounted.
The ventilation unit should not be used to dry newly built houses during construction or
immediately after construction.
The ducts must be covered and the units must not be connected until the house is
ready for occupation, which means that the house is clean and dry. This is to prevent
any construction dust and condensed water from depositing in the ducting system and
to prevent any sanitation inconveniences from the ventilation units later on.
Should this not be respected the warranty of the unit will be annulled and any kind of
maintenance will be done at the customers own expense.
Follow the instructions in this guide before you start op and use the unit!
This guide covers the following sections
General information
Description of the product
Functional description
Description of the control panel
User's guide
Preventive maintenance
Accessories
Fault finding guide
Index
xxxxxx1128910
Topic See page
23
24
26
29
31
33
34
37
40