Ac 800M Controller - Key Features - ABB AC 800M Manual

AC 800M Controller – Key Features
AC 800M Controller – Key Features
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
56
Modularity, allowing for step-by-step expansion.
Simple DIN-rail attachment/detachment procedures, using a unique slide and
lock mechanism.
Fast, simple troubleshooting procedures available via unit/channel LEDs.
IP20 Class protection with no requirement for enclosures.
Allows for the use of low-cost, sealed enclosures due to extremely low unit
heat dissipation, even at an ambient temperature of 40
enclosure.
All units are fully EMC certified.
Connection of up to 192 I/O signals, via Electrical ModuleBus, is available.
Connection of up to 1344 I/O signals, via Optical ModuleBus, is available.
Connection of S100 I/O is available.
Connection of Satt I/O is available.
Allows connecting a large number of I/Os, via PROFIBUS DP.
Connection to FOUNDATION Fieldbus High Speed Ethernet (FF HSE).
Connection to Modbus TCP.
Connection to IEC 61850.
Connection to Advant Fieldbus 100.
Connection to MOD5-to-MOD5.
Connection to PROFINET IO.
Connection to EtherNet/IP.
Allows connecting custom protocols of a large amount of Serial
communication RS-232C ports.
Connection to MasterBus 300 Networks.
Connection to INSUM via Gateway (Ethernet/LON).
Connection to ABB Drives is available, over DriveBus and ModuleBus.
Section 1 Introduction
 
C (104 F) outside the
3BSE036351-510 A