ABB AC 800M Manual page 25

About This User Manual
Terms that uniquely apply to this User Manual are listed in the following table.
Term/Acronym
ABB Drives
AC 800M
AC 800M Controller
AC 800M HI Controller
Central I/O
CEX-Bus
DDCS
DIN-rail
DriveBus
DriveDebug
DriveWindow
EMC
Ethernet
Ethernet Address
FCI
3BSE036351-510 A
Table 1. Terminology
ABB Oy, Drives Group
A hardware platform, comprising Processor Units,
communication interfaces and other supporting devices,
that can be configured to provide a controller.
A controller configured from the AC 800M hardware
platform and Controller FW for AC 800M.
A controller configured from a relevant selection of the
AC 800M hardware platform and Controller Firmware for
AC 800M HI.
Input/Output units, mounted onto a DIN-rail, and directly
connected to the AC 800M controller via ModuleBus.
Communication Expansion Bus, (for communication
units).
Distributed Drives Communication System
Industry standard 'Top Hat' type mounting rail.
Communication link dedicated for ABB drives.
Diagnostic Tool
Commissioning and Maintenance Tool
Electro-Magnetic Compatibility.
Network cabling system according to IEEE802.3.
The term Ethernet address is often used in extended
meaning to refer to the hardware addresses of not only
Ethernet (IEEE 802.3) hardware, but also Wireless
(IEEE 802.11) hardware, and FDDI (ISO 9314), see also
MAC-address.
Fieldbus Communication Interface.
Description
Terminology
25