Related Manuals for Zimmer EB5000 Series
Summary of Contents for Zimmer EB5000 Series
- Page 1 INSTALLATION AND OPERATING INSTRUCTIONS Adjustment jaws EB5000 series DDOC00206 THE KNOW-HOW FACTORY www.zimmer-group.com...
-
Page 3: Table Of Contents
10.5 Alignment of the adjustment jaws ....................................18 10.6 Installing accessories ........................................18 11 Gripping force charts ................................. 18 12 Maintenance ....................................19 13 Declaration of Incorporation ..............................20 Zimmer GmbH • Im Salmenkopf 5 • 77866 Rheinau, Germany • +49 7844 9138 0 • www.zimmer-group.com... -
Page 4: Supporting Documents
This category contains useful tips for handling the product efficiently. Failure to observe these tips will not result in damage to the product. This information does not include any information relevant to health or workplace safety. Zimmer GmbH • Im Salmenkopf 5 • 77866 Rheinau, Germany • +49 7844 9138 0 • www.zimmer-group.com... -
Page 5: Safety Notices
► Observe the specified maintenance intervals and specifications regarding the quality of the operating material. ► When using the product under extreme conditions, adjust the maintenance interval according to the degree of contamination. Zimmer GmbH • Im Salmenkopf 5 • 77866 Rheinau, Germany • +49 7844 9138 0 • www.zimmer-group.com... -
Page 6: Proper Use
Installation, commissioning and maintenance may only be performed by trained specialists. These persons must have read and understood the installation and operating instructions in full. Zimmer GmbH • Im Salmenkopf 5 • 77866 Rheinau, Germany • +49 7844 9138 0 • www.zimmer-group.com... -
Page 7: Product Description
The product can be installed on series GEP5000, GED5000, GPP5000, GPD5000 and GPW5000 and combined with the respective accessories. The product is available in steel ST and aluminum AL versions. Zimmer GmbH • Im Salmenkopf 5 • 77866 Rheinau, Germany • +49 7844 9138 0 • www.zimmer-group.com... -
Page 8: Functional Description
The movable slides can be unlocked, shifted and locked again into the designated positions by pushing the spring-loaded pins together. Guide rail Slides Zimmer GmbH • Im Salmenkopf 5 • 77866 Rheinau, Germany • +49 7844 9138 0 • www.zimmer-group.com... - Page 9 INSTALLATION AND OPERATING INSTRUCTIONS:EB5000 Mounting screw Centering Disc Operating element Gripper jaw Zimmer GmbH • Im Salmenkopf 5 • 77866 Rheinau, Germany • +49 7844 9138 0 • www.zimmer-group.com...
-
Page 10: Technical Data
8 Accessories/scope of delivery INFORMATION If any accessories not sold or authorized by Zimmer GmbH are used, the function of the product cannot be guaranteed. Zimmer GmbH accessories are specifically tailored to the individual products. ► For optional accessories and those included in the scope of delivery, refer to our website. -
Page 11: Installation
The product can be installed flexibly and quickly. The numbering of the detent notches enables the gripper finger position to be configured securely. Zimmer GmbH • Im Salmenkopf 5 • 77866 Rheinau, Germany • +49 7844 9138 0 • www.zimmer-group.com... -
Page 12: Installing The Rail
Detent notches INFORMATION ► Install the rails on the gripper jaws in the same direction. Zimmer GmbH • Im Salmenkopf 5 • 77866 Rheinau, Germany • +49 7844 9138 0 • www.zimmer-group.com... -
Page 13: Installing The Adjustment Jaw
► Mount the product on the gripper jaws using the screws. Guide rail Mounting screw Centering Disc Zimmer GmbH • Im Salmenkopf 5 • 77866 Rheinau, Germany • +49 7844 9138 0 • www.zimmer-group.com... - Page 14 ► Note that the weight of a jaw set includes the weights of the gripper finger and the adjustment jaw. Gripper finger Adjustment jaw Zimmer GmbH • Im Salmenkopf 5 • 77866 Rheinau, Germany • +49 7844 9138 0 • www.zimmer-group.com...
-
Page 15: Installing The Gripper Finger From Above
► Set the gripper finger on the slide. ► Install the gripper finger from above with the supplied screws. Slides Mounting screw Centering Disc Gripper finger Zimmer GmbH • Im Salmenkopf 5 • 77866 Rheinau, Germany • +49 7844 9138 0 • www.zimmer-group.com... -
Page 16: Installing The Gripper Finger From Below
► Push in the operating element until the pin is blocked at the last position behind the rail. Guide rail Slides Operating element Zimmer GmbH • Im Salmenkopf 5 • 77866 Rheinau, Germany • +49 7844 9138 0 • www.zimmer-group.com... - Page 17 ► Slide the slide into the rail again until the lock engages in the first position. ► Screw the operating elements into the pins again. Mounting screw Centering Disc Gripper finger Zimmer GmbH • Im Salmenkopf 5 • 77866 Rheinau, Germany • +49 7844 9138 0 • www.zimmer-group.com...
-
Page 18: Alignment Of The Adjustment Jaws
11 Gripping force charts INFORMATION ► You can find information on our website. ► Please contact Zimmer Customer Service if you have any questions. Zimmer GmbH • Im Salmenkopf 5 • 77866 Rheinau, Germany • +49 7844 9138 0 • www.zimmer-group.com... -
Page 19: Maintenance
► Apply a light coat of oil to the bores. Guide rail Slides Spring Zimmer GmbH • Im Salmenkopf 5 • 77866 Rheinau, Germany • +49 7844 9138 0 • www.zimmer-group.com... -
Page 20: Declaration Of Incorporation
Authorized representative for the (Place and date of issuance) Martin Zimmer compilation of relevant technical (Legally binding signature) documents Managing Partner Zimmer GmbH • Im Salmenkopf 5 • 77866 Rheinau, Germany • +49 7844 9138 0 • www.zimmer-group.com...
Need help?
Do you have a question about the EB5000 Series and is the answer not in the manual?
Questions and answers