Staircase Arb (Option E36150Advu) - DATATEC KEYSIGHT E36150 Series User Manual

Staircase Arb (Option E36150ADVU)

Step 1– Select Arb waveform
Press Arb to access the Arb selection menu. Then select Staircase.
Press Back to return to Arb main menu.
Step 2 – Configure the Staircase Arb
Configure the Staircase Arb accordingly. Refer to the below table for details.
Parameter Available Key Settings
Arb Type Voltage or Current
Start Setting (I0 or minimum to maximum
V0)
End Setting (I1 or minimum to maximum
V1)
Delay (t0) 0 – 3600 s
Step time (t1) 0 – 3600 s
End time (t2) 0 – 3600 s
90
Sets the output Arb type.
Default is Voltage.
Action required:
Press Arb Type to toggle between Volt and Curr.
Volt Selects voltage as output Arb type.
Curr Selects current as output Arb type.
Sets the setting before the staircase.
Sets the setting after the staircase.
Sets the delay time after the trigger is received but before the staircase starts.
Sets the time to complete all staircase steps.
Sets the time the output remains at the end setting after the staircase completes.
Description
Keysight E36150 Series User's Guide