Table of Contents
Advertisement
The Configure LAN tab on the top allows you to change the instrument's LAN parameters; exercise caution when
doing so, as you may interrupt your ability to communicate with the instrument.
When you click the Control Instrument tab, the instrument will ask you for a password (default is keysight), and then
it will open a new page, shown below.
This interface allows you to use the instrument just as you would from the front panel. Note the curved arrow keys
that allow you to "rotate" the knob. You can press the arrow keys to rotate the knob clockwise and counter-
clockwise, just as you would press any of the other keys on the front panel.
READ WARNING
Be sure to read and understand the warning at the top of the Control Instrument page.
54
Keysight E36150 Series User's Guide
Advertisement
Table of Contents
