Fuse Information - DATATEC KEYSIGHT E36150 Series User Manual

Fuse Information

BEFORE APPLYING POWER
– Verify that the correct fuse is installed.
– Ensure the mains supply voltage fluctuation do not exceed ±10% of the nominal supply voltage.
The following table describes the fuse that you should use.
Option Fuse
part number
E36154A-0E3 2110-0623
E36155A-0E3
E36154A-0EM 2110-0624
E36155A-0EM
E36154A-0E9 2110-1747
E36155A-0E9
To configure the correct fuse, follow the three steps shown below:
Locate the fuse
holder as shown in the image
above, and pull the fuse holder
out of the power supply.
Keysight E36150 Series User's Guide
Description
Fuse 6.3 A, 250 V, 5 x 20 mm Time Delay
Fuse 10 A, 250 V, 5 x 20 mm Time Delay
Fuse 12.5 A, 250 V, 5 x 20 mm Time Delay
Remove the blown fuse and
insert the proper replacement
fuse into the fuse holder.
Fuse type
Cartridge
Cartridge
Cartridge
Re-insert the fuse holder into the
power supply.
Application
230 V line voltage
115 V line voltage
100 V line voltage
27